Can You Spray Paint Plastic Adirondack Chairs

Do you have faded, antiquated, plain ugly, or just old plastic chairs? Then try giving them a new look of colorful plastic chairs with a coat of paint in a modern color and a glossy finish.

You may be wondering, “Can you spray paint plastic Adirondack chairs?” because you know that brush painting isn’t a good match for plastic.

Simply stated, yes, you can use spray paint on plastic furniture. When you use spray paint, you can expect a flawless finish that is both durable and completely mark-free. However, you’ll have to allow some time for it to dry and finish.

Without further ado, let us proceed to the article itself. Learn everything you need to know about spray painting.

Can You Spray Paint Plastic Adirondack Chairs?

Yes, you can paint your Adirondack chairs with spray paint. In contrast to decades past, when painting plastic chairs or any outdoor furniture resulted in peeling because the material was too smooth for a coating to adhere to, today’s materials are much more accommodating.

Paints are now available that may be used on a wide variety of plastics. Notable spray paint brands include Krylon Fusion for Plastic paint and Rust-Oleum. 

The ability to refinish outdoor furniture or other objects with components composed of different materials is greatly facilitated by paint that adheres to plastic, metal, wood, and a diverse range of other surfaces.

You can use either of these, along with any other high-quality spray paint, on a wide variety of materials, not only plastic.

Safety Guidelines before Beginning the Procedure

Whenever you use spray paint, it’s important to remember a few basic safety rules. To get a good finish while using spray paint plastic chairs, you might need mineral spirits. Ingesting it is bad for you. That’s why it’s bad for you if any of it gets inside your body.

Just work in a well-ventilated location, don’t breathe the gases, don’t get the can too close to any heat sources, and don’t eat or drink anything in the vicinity. Plus, when you’re not using the can, make sure the lid is completely closed.

When your hands come into contact with the mineral spirits, wash them thoroughly with soap and water. Last but not least, make sure you have a well-ventilated, enclosed space to paint your plastic goods before you start. Spray paint overspray can travel a fair distance.

How to Spray Paint Plastic Adirondack Chairs?

The procedure to spray paint plastic Adirondack chairs with spray paint is outlined in the following steps for your reference.

Find Your Old Chair

If you’re going to be painting, you should find your plastic chair first. Take it to where you’ll be spray painting it once you find it.

Now is the time to get the area ready, as spray paint might leave an undesirable trace. Keep a towel or some sort of cloth under the chair at all times. Then prepare an outdoor living space to spray-paint old plastic Adirondack chairs.

Gather the Tools and Equipment

The time has come to prepare the paint and equipment needed to refurbish your chair. Initially, you’ll need a bucket, drop cloth, and some rags. Second, get some dish soap and water to wipe out the chair’s surface.

The next step is to gather some sandpaper and mineral spirits. Lastly, the most important thing is to paint. Get the spray paint you’ll want and keep it at the spot where you’ll be painting the chair.

Clean the Chair Surface

Being left outside in all kinds of weather causes plastic chairs to pick up all kinds of dirt and stains. Giving the chairs in your home a quick cleaning will do the trick before getting painted. The paint may peel if the chairs have a glossy finish because it won’t stick as effectively.

Use a sponge, hot water, and an all-purpose solution to clean a plastic Adirondack chair. Use an ammonia-based cleanser for outdoor furniture that has been left in the elements for an extended period of time or that has developed mold or mildew stains that won’t budge.

Plastic yard furniture, outdoor tables, vinyl fences, as well as plastic Adirondack chairs, all of which are likely to accumulate a substantial amount of fungus, may require more than one cleaning and air drying.

Then you will do vigorous washing with a scrub brush. Then, wash the surface area of your plastic Adirondack chair down with fresh, cold water.

Let the Chair Dry

If you’ve just finished washing your plastic chairs, wipe them down with a towel, but then set them outside to dry entirely in the air. If you need to dry them quickly, you can put them out in the sun.

It’s important to make sure that they weren’t overheated by the sun before spray painting, so make sure you move them into the shade. If you skip this procedure, the end result could be poor. You should let them dry completely in the air.

Prepare the Chair to Spray Paint

If you want to paint your plastic chairs without getting paint on any of the non-plastic parts, such as the metal legs, you should take them off first. Finally, select an area with enough ventilation, ideally outside, and protect the flooring or bottom with drop blankets or newspapers.

Sand the Glossy Surfaces

Can You Spray Paint Plastic Adirondack Chairs

If the plastic chairs have been painted in the past, a light sanding is recommended. Spray paint is more adhesive on a rougher, matte surface than a glossy one. It is a necessary process because most plastics have a shiny finish. 

In order to have good adhesion from the primer and paint, you only simply lightly scratch the surface. In order to avoid damaging the surface, use fine-grit sandpaper-like 180-200 grit fine sandpaper. 

You should sand plastic by hand because it is soft. In order to avoid leaving obvious and permanent scratches, it is recommended that you perform a test sanding on an inconspicuous area of the chair before proceeding with the rest of the project. 

Apply Mineral Spirits

use mineral spirits to remove paint

Remove the tiny plastic dust left over from sanding with a final cleaning using mineral spirits or with isopropyl alcohol. Gather the plastic chair and move it to a dry, well-ventilated area, such as beneath a terrace shade or outside on a sunny day. 

Splash some of the alcoholic solutions onto a towel and use that to wipe out the area. Repeat as often as needed to get the rags completely free of dust and dirt.

Prime the Chair

If you prime the chair first, you can use any spray paint you like. This is useful if you’re looking to paint something but don’t have the right paint for plastic.

It’s best to prime the plastic with an outdoor primer. The first step is to shake the can well before spraying the full chair in a continuous motion from 12 to 18 inches away. Please follow the instructions on the primer’s container regarding drying time.

You should take precautions against paint mist by donning protective goggles and a dust mask whenever using spray paint or primer.

Spray the First Coat of Paint

how to spray paint plastic adirondack chairs

Plastic is very different to deal with than wood, paper, or board since it does not have pores and does not absorb paint. Therefore, patience is required while spray painting plastic.

Before using the paint, shake the container well and perform a trial spray toward the side, further into the air, or onto a scrap piece of material to ensure the paint shoots smoothly and evenly.

Apply a thin coat of plastic spray paint to each chair.

Spray the plastic chair by holding the can about 12 inches away from the surface and moving the can as you spray. Spray it lightly all over the surface. 

Do not try to get full coverage of color at this stage, as doing so will likely result in drips. At the same time, do not apply paint second coat until the first one has dried for about an hour or a bit longer. However, the longer you can hold off, the better.

Apply the Second Coat of Paint

Wait until the first layer of paint on the plastic chair has dried before applying the second. There shouldn’t be any tackiness to the paint at all; instead, it should feel firm.

Finish up the plastic by giving it a second layer of paint. Don’t overwhelm the surface with paint like the first time around. Maintain an oblique angle with the paint can and spray the surface from a distance of 12 inches.

Finally, how many additional coats you’ll need to protect a certain piece of plastic outdoor furniture is up to you and the piece itself.

Inspect Your Work

You might need to go back and fix a few little things here and there if a few spots on the rear end are not accessible to paint. Make sure all the easily visible parts of your chair are coated with paint by getting down on all fours and crawling around it.

You have to do this before applying the last layer of protection. If everything has been completed, get ready to undertake the final task.

Apply the Last Protective Coat

After waiting several hours to ensure the plastic is completely dry, you can apply a final layer of paint after the previous two coats. Usually, all the coats should be light coats because it would take less time to coat dry.

If your chairs are going to be exposed to the environment, it is highly advised that you seal them with an additional weatherproof and protective coat. Essentially, this step is the same as the ones before it.

Let the Chair Dry Completely

Once you’re satisfied with the paint job, wait at least one day before utilizing the furniture. Once the paint has dried fully, you can remove the painter’s tape.

If the weather is extremely hot, drying them in the shade may be the best option. Finally, you will enjoy a warm afternoon on newly painted old chairs in the adequate space of your patio.

What is the Best Spray Paint for Plastic Adirondack Chairs?

There are a wide variety of spray paints available on the market. It’s a hard decision because there are so many options! For a plastic surface, I would select a product designed for use with it.

If you were looking for spray paint specifically designed for plastic, you should definitely go for Krylon Fusion spray for plastic. 

Simply put, it’s the best there is. A consistent mist is released from the spray nozzle with no sputtering. It dries rapidly, is self-leveling, and lasts a long time.

Using it correctly will make your surface look like it came that way from the manufacturer. It’s amazing that you can use this paint on wood, too.

Alternatives to Spray Paint for Plastic Painting

Though spray paint is the most effective method for painting plastics, other methods are also available. As an example, plastics can be painted by using a brush.

Spray paint is commonly used because it leaves behind a clean, shiny finish that is easy to maintain. Brushing paint onto plastics, on the other hand, might result in smearing or brush marks. Who wouldn’t want their plastic outdoor furniture as shiny as possible? 

That’s why using spray paint rather than a paintbrush is the best option when working with small plastic pieces. Spray paint may be more convenient than brushes if the surface area to be painted isn’t more than 25sq ft.

Frequently Asked Questions

  • Is It Better to Paint Plastic with a Spray Can or a Brush?

While spray painting plastic is the preferred method, brush painting plastic is an option. On the smooth plastic surface, brush painting may leave brush marks. So, spray paint is the better option.

  • How Much Paint is Needed for Each Chair?

One chair would only require half a can of paint to get fully painted. You could get by with this much paint if you just paint twice, but if you want to paint more than that, you’ll need to get more.

Bottom Line

It’s a little more challenging to paint plastic furniture. When using a regular paint brush on plastic, you should avoid doing so because the brush mark will be visible once the paint has dried. Spray paint is the only other choice at this point. 

After reading the whole article, we hope there’s no doubt from your end to believe that you can spray paint plastic Adirondack chairs. Even though it will be a time-consuming process overall, the product that you finish up with will be satisfactory.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *